Here are some machines info for your reference:
1. PTFE Rod Extruder
OD 3mm-150mm, 150mm-500mm by Ram Extrusion method with OD Tolerance: ±0.02mm. Continue extrusion with unlimited length, and the product which produce from it has high density and smooth surface.
2. PTFE Tube Extruder
OD 20mm-500mm continues extrusion. Thickness of wall tolerance: ±0.02mm.Wall thickness 3-15mm, Continue extrusion with unlimited length, also it has following good physical property:
Elongation: >250% ELO
Tensile Strength: > 3000 PSI
Specific Gravity: > 2.14 S.G.
3. PTFE Semi-Automatic Press Molding Machine
OD up to 1000mm. Height depends on required for molded tube and rod;
Each output time fixed and not affected by workers' emotion or speed, so its efficiency is very high;
The machine is controlled by program control, each quality is same and not affect by operator;
Exhaust automaticlly to guarantee no porosity in products;
Maximum pressure 20 Mpa (up to 40 Mpa is both OK, anyway, it is according to your requirements);
Has equipment to assist loading and unloading without manual work;
Reasonable design of cylinder to aviod pollution.
4. PTFE Full Automatic Press Molding Machine
OD up to 100mm with 100mm height with 300-400pcs per hour capacity for tube and rod.
25KGS loading cavity / PLC control and screen touch system / Automatic alarm if powder is exhausted
5. PTFE Electric & Nature Gas Sintering Oven......
sukoptfe.com
ptfe-machinery.com
JIANGSU SUNKOO MACHINE TECH CO.,LTD | | | | |
No comments:
Post a Comment